Mini Bike Jack Shaft Systems, Performance Engines, Adjustable Motor Mounts
Mini Bike Performance Exhaust Headers, Honda GX200 and Clone Engine Performance Parts
Baja Doodlebug and Motovox Minibike Engine Swap Kits
Baja and Motovox Mini Bike performance Parts Specialist
Re Jetted Stock 97cc Replacement Carb
Adjustable low speed circuit.
Richer main jet
Stock 97cc carb gasket set
Tank mounted fuel filter
Fits Stock 97cc engines, 4-6.5hp Honda
and Clone engines.
Performance 26mm slide Carb kit
Fits Honda or Clone 6.5hp engines.
Governor removal , Billet rod and flywheel
recommended in conjunction with this Carb.
This is the best Bang for the Buck Mini Bike
Carb we have tested!
Easy to tune and choke system does not have a
fast idle circuit to cause a runaway during cold starts
Honda ,Clone and Predator
Air filter with Two Stage
Uni Filter and Billet Adapter
Same Air filter Kit only with K&N style filter
109mm Long Carb Stud
Used for installing a performance air filter adapter
on Harbor Frieght 212 Predator or 4hp Lifan or Honda GX120 engines.
Predator engines need one longer stud
4hp engine requires replacing both.
Re-Jet Kit for stock 6.5hp carb
Needed when installing performance
Exhaust and air filter
Throttle Linkage Kit for Stock
4-6.5 hp Carb
Easy cable hook up kit for
Mini Bike or Kart applications
Fits stock breather hose or
can be used on Catch can
Crank Case Catch Can
K&N Style 30deg Filter
Outerwear Pre- Filter
These will work both on the Uni style foam
filter and K&N style filters
2 Stage Foam Uni Filter
Billet Air Filter Adapter
for GX120-200 and Clone
Choke lever retainer for Air filter adapter
Keeps lever from falling off carb.
Fuel Filter for 1/4 line
1/4 to 3/16 fuel line reducer
1/4 " Fuel Valve
1/4" Fuel Line
3 Ft Roll
3 ft roll 3/16 fuel Line
NGK 90 Deg' Plug Wire End
Smaller angled cap to replace
bulky factory plug boot.